
Profile Design Mountain bike handlebar stems
The stem connects the bicycle's handlebars to the fork. These stems can break during use, causing the bicycle rider to crash and suffer serious injuries.
- Crash
- About 8,000 units
- 6 reports
15 supported consumer-product notices published in November 2000, from official CPSC data.

The stem connects the bicycle's handlebars to the fork. These stems can break during use, causing the bicycle rider to crash and suffer serious injuries.

The high chairs are adjustable and have both recline and upright positions. In the recline position, the seats can separate from the frame and fall to the ground. In the upright position, the seats can slip from their set height position to the lowest position or can fall to the ground. Additionally, some seats were sold with a metal restraint anchor that can slip through the back of the seat, allowing the child to fall to the ground. Infants and toddlers can suffer head, face and bodily injuries.

The glass ring exterior portion or trim of these lights can fall from the fixture, posing a risk of lacerations and impact injuries.

The power strips have undersized wires, lack over-current protection and grounding, and the plastic case is flammable. The extension cords have undersized wires and lack over-current protection. Both the power strips and the extension cords can overheat, presenting electrocution, shock and fire hazards.
Advertisements

The eyes on these toys could detach, posing a choking hazard to young children.

The two bolts that attach the handlebars can break. If the handlebars separate from the motorcycle, the rider loses steering control and can crash, posing the risk of serious injuries.
Advertisements

Kawasaki Motors
A frame down tube on these motorcycles can crack below the steering head. Use of the motorcycle with a cracked down tube can result in failure of the frame, which can cause the rider to lose control of the motorcycle and crash, resulting in injury or death.

The drawcord around the ankle of these slippers can break and release the toggle used to tighten the drawcord. The toggle presents a choking hazard to young children.
Advertisements

These helmets fail impact testing required under CPSC's Safety Standard for Bicycle Helmets, violating the Consumer Product Safety Act. Riders wearing these helmets are not adequately protected from falls, and could suffer severe head injuries or death.

The toy has two elastic cords that form a loop, posing a strangulation risk to young children.

The seatbelts on these go-karts can unintentionally unlatch, posing a risk of serious injury to riders.

A mounting bracket on the front suspension of the Honda Rancher TRX350 models could be welded improperly to the frame. If this mounting bracket breaks, the vehicle could lose steering control and crash. The brake pads on the Honda TRX400EX models could have been assembled incorrectly. This can cause the brakes to fail, resulting in severe injury or death.
Advertisements