2025–2026 ALTEC AM SERIES AERIAL DEVICE and 1 more model: equipment, mechanical, containment, valve
A separated activation handle can allow the control valve to eject hot oil, increasing the risk of injury.
- Recall
48 indexed NHTSA safety campaigns naming ALTEC, 2024–2026, newest first, each linking through to the official notice.
21 campaigns
A separated activation handle can allow the control valve to eject hot oil, increasing the risk of injury.
An incorrectly tightened U-bolt may loosen and allow the rear axle to loosen or detach, increasing the risk of a crash.
Loose hardware can fall out and release the cylinder pin, causing the jib to swing freely and the winch line to drop up to 10 feet, which increases the risk of injury.
A front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.
Advertisements
A missing rearview camera can reduce the driver's view behind the vehicle, increasing the risk of a crash.
A step that separates or becomes unstable while in use, increases the risk of a fall or injury.
Advertisements
When the vehicle is moved or driven with the boom out of stow, the vehicle could exceed the recorded travel height, increasing the risk of a crash.
An electrical short circuit can increase the risk of a fire.
Advertisements
An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.
A fastener that has not been heat treated could fail, resulting in separation of the pedestal and turntable, increasing the risk of injury.
An overheated wire can ignite flammable material in the cargo area, increasing the risk of fire.
A short may cause the inverter AC wiring to overheat, increasing the risk of a fire.
Advertisements
While using the pole rack at full capacity, an incorrect high vertical center of gravity during braking and cornering may lead to a loss of vehicle control, increasing the risk of a crash.
An aerial device that operates while the vehicle is in gear or neutral can cause unexpected vehicle movement and increase the risk of injury.
Missing welds can lead to platform joint failure due to fatigue or overload, resulting in the platform falling from the boom tip, increasing the risk of injury.
Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.
While driving, the brakes may activate unexpectedly without the driver's input, increasing the risk of a crash.
An inoperative emergency stop switch increases the risk of injury.
Loss of body lighting or trailer lights increases the risk of a crash.
An incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.
An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.
17 campaigns
Reduced insulation can conduct electricity to the operator or others touching the vehicle, increasing the risk of injury and death.
Wiring without adequate protection may short circuit, increasing the risk of a fire.
Shear plate lockbolt failure can result in separation of the elevator sub-base and truck frame, increasing the risk of injury.
An emergency stop that does not shut off the unit during an emergency increases the risk of death or serious injury.
An overheated battery cable increases the risk of a fire.
Overloaded circuits may overheat and increase the risk of fire.
The exhaust may overheat the outrigger pad, increasing the risk of a fire.
Loose bolts may allow the retaining plate or platform to detach, becoming a road hazard and increasing the risk of a crash. The platform may also detach from the boom tip while elevated with occupants aboard, increasing the risk of injury or death.
An overloaded vehicle can increase the risk of a crash.
An engine shutdown increases the risk of a crash.
A cable step that fails during use increases the risk of injury.
A front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.
Unexpected activation of the emergency brakes may cause the vehicle to stop suddenly, increasing the risk of a crash.
A damaged TCCM and disrupted chassis functions can result in a loss of handling and control or brake performance, increasing the risk of a crash.
A fuel leak in the presence of an ignition source can increase the risk of a fire.
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Unintended boom movement increases the risk of injury.
10 campaigns
Overload of the front axle capacity could cause it to fail and instability, increasing the risk of injury.
A loss of lower boom support during operation could cause the lower boom to fall, increasing the risk of injury.
A loss of stability during operation could cause the crane to fall, increasing the risk of an injury.
Hydraulic hoses that overheat can increase the risk of a fire.
An engine shutdown increases the risk of a crash.
A brake fluid leak can cause brake failure, increasing the risk of a crash. A fuel leak in the presence of an ignition source can increase the risk of a fire.
A/C hoses that overheat can increase the risk of a fire.
Lights that fail to illuminate can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
Uncontrolled movement of the boom can increase the risk of injury.
A short circuit increases the risk of a fire.
Advertisements
A list of campaigns is not a VIN check. Use the official lookup to find out whether a specific vehicle has an unrepaired recall.
NHTSA: Campaigns reported from January 1, 2024; older campaigns are not imported. Use NHTSA for VIN checks. Source coverage explains which notices are indexed and when each source was imported.
Vehicle & road safety recalls has the full checking guide and every indexed notice in this category.