Recall #19-031 · Published November 8, 2018

IDT International Bedside Fire Alarm and Clock

Lifetone Technology Recalls Bedside Fire Alarm and Clocks Due to Failure to Fully Alert Consumers to a Fire

CPSC published a recall notice for Bedside Fire Alarm and Clock from IDT International on November 8, 2018. CPSC identifies this hazard: The bedside fire alarm and clock can fail to operate and fully alert consumers to a fire. The official remedy states: Consumers should immediately stop using the recalled product if the digital display is not working and contact Lifetone Technology to receive a prepaid label for the return of the alarms and instructions on receiving a free replacement alarm.

Lifetone Technology HLAC151 Bedside Fire Alarm & Clock
Lifetone Technology HLAC151 Bedside Fire Alarm & Clock
Image: CPSC recall notice

What to check on the product label

Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.

The CPSC data does not provide a discrete model-number list for this record. Compare the product description and identification details on the official notice.

Additional identifying details

The serial number is printed on the left side of the silver sticker on the bottom of the unit.

Which products are included?

Read the full CPSC product description and restrictions

This recall involves Lifetone HLAC151 Bedside Fire Alarm and Clock with serial numbers ranging from AC160600001 through AC160604102 and AC170100001 through AC170106030 only. The serial number is printed on the left side of the silver sticker on the bottom of the unit. The bedside alarm and clock is an assistive alerting device intended for in-home use by individuals with hearing loss. The alarm detects the T3 emergency signal given by existing smoke alarms. When the T3 signal from a smoke alarm is detected, the alarm signals at a lower frequency, which may be better heard by individuals with mild to severe hearing loss. The alarm also gives spoken emergency signals "FIRE GET OUT" in both English and Spanish. Defective units continue to sound a low frequency emergency audio signal and spoken signal "FIRE GET OUT" in English and Spanish but the optional bed shaker, if attached, will not operate. The white, rectangle clock measures 8.5 inches wide by 4.2 inches high by 4.5 inches wide. The fire alarm and clock has "Lifetone" printed on the front of the unit and a digital display with the date, time and type of emergency. There is a large black dome-shaped microphone on the top left of the alarm.

Confirm these details on the official CPSC notice

Why it was recalled

The bedside fire alarm and clock can fail to operate and fully alert consumers to a fire.

Incidents and injuries

Lifetone has received 77 reports of alarms with a blank screen. No injuries have been reported.

Official remedy

Consumers should immediately stop using the recalled product if the digital display is not working and contact Lifetone Technology to receive a prepaid label for the return of the alarms and instructions on receiving a free replacement alarm.

Remedy type: Replace

Product and sales details

Brand
IDT International
Manufacturer
IDT International Limited, of China
Product type
Smoke alarms
Recall number
19-031
Units
About 10,000
Manufactured in
China
Sold at / sales period
Online at www.lifetonesafety.com for about $215 and installed by fire departments and the American Red Cross nationwide from November 2016 through September 2018.
Importer
Lifetone Technology Inc., of Oklahoma City, Okla.

Recall contact information

Lifetone Technology at 800-648-7923 from 9 a.m. to 5 p.m. CT Monday through Friday or online at www.lifetonesafety.com and click on the Product Safety tab for more information.

Verify phone numbers, hours, and websites on the current CPSC notice before contacting the firm.

Related recalls

Selected by shared brand or household-product category.