Recall #15-710 · Published December 2, 2014

Eaton Electrical Meter Breakers

Eaton Recalls Electrical Meter Breakers Due to Shock Hazard (Recall Alert)

CPSC published a recall notice for Electrical Meter Breakers from Eaton on December 2, 2014. CPSC identifies this hazard: The meter breaker's electrical components can be easily accessed, posing a shock hazard to consumers. The official remedy states: Only qualified electrical contractors should repair the product, and consumers should not open the meter breaker's enclosure. Electrical contractors should immediately contact their meter breaker distributor to determine if any of their units are included in this recall. Contractors will receive a free remedy kit, including shipping. Consumers should contact Eaton or the electrical contractor that installed the recalled meter breaker for the free installation of the repair kit.

Recalled Eaton meter breakers, MBED 3042 series
Recalled Eaton meter breakers, MBED 3042 series
Image: CPSC recall notice

What to check on the product label

Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.

The CPSC data does not provide a discrete model-number list for this record. Compare the product description and identification details on the official notice.

Additional identifying details

The enclosures have a single warning label on the bottom of the lower right compartment door, which is secured with a latch and hasp at the bottom.

Which products are included?

This recall involves MBED 3042 series residential meter breaker. The meter breakers are service entrance equipment systems that consist of a single meter socket and load center or a meter socket and main breaker combined in one enclosure. The meter breakers have gray metallic enclosures and measure about 14 ¼ inches wide by 42 ½ inches high by 7 inches deep. The recalled units have catalog numbers MBED3042B200BF, MBED3042B200BF6, MBED3042B225PV or MBED3042PV200BF. The catalog number is located on the unit's packaging. The enclosures have a single warning label on the bottom of the lower right compartment door, which is secured with a latch and hasp at the bottom. Consumers should not open the meter breaker's enclosure.

Confirm these details on the official CPSC notice

Why it was recalled

The meter breaker's electrical components can be easily accessed, posing a shock hazard to consumers.

Incidents and injuries

None

Official remedy

Only qualified electrical contractors should repair the product, and consumers should not open the meter breaker's enclosure. Electrical contractors should immediately contact their meter breaker distributor to determine if any of their units are included in this recall. Contractors will receive a free remedy kit, including shipping. Consumers should contact Eaton or the electrical contractor that installed the recalled meter breaker for the free installation of the repair kit.

Remedy type: Repair

Product and sales details

Brand
Eaton
Manufacturer
Eaton Corporation, of Moon Township, Pa.
Recall number
15-710
Units
About 1,100
Manufactured in
United States
Sold at / sales period
Authorized distributors in California and Nevada from July 2014 through August 2014 from about $200.

Electrical Meter Breakers

CPSC product type: Panelboards or Circuit Breakers or GFCIs or Fuses

Recall contact information

Eaton at (800) 330-6479, Option 8, from 9 a.m. to 6 p.m. ET Monday through Friday or online at www.electrical.eaton.com and click on MBED Safety Recall for more information.

Verify phone numbers, hours, and websites on the current CPSC notice before contacting the firm.

Related recalls

Selected by shared brand or household-product category.