RecalledRecall 08-393Published

Aqua Lung Titan DIN 1st Stage Scuba Regulators and Titan/Conshelf DIN Scuba Adaptors

Aqua Lung Recalls Scuba Regulators and Adapters Due to Drowning Hazard

Hazard
Drowning
Units
About 6,000 units
Incidents
1 report
Remedy
See the notice

CPSC recall 08-393, announced September 10, 2008, covers Aqua Lung Titan DIN 1st Stage Scuba Regulators and Titan/Conshelf DIN Scuba Adaptors (about 6,000 units). Over-tightening of the DIN retainer by a technician during installation can result in the retainer breaking under pressure, a rapid escape of air from the scuba cylinder, and the regulator detaching from the scuba cylinder. The notice cites 1 incident report. Consumers should immediately stop using the recalled diving regulators and DIN adaptors and return them to any authorized Aqua Lung dealer for a free replacement DIN retainer. Recall contact: call (877) 253-3483, or go to www.aqualung.com.

What to check on the product label

Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.

The CPSC data does not provide a discrete model-number list for this record. Compare the product description and identification details on the official notice.

Which products are included?

The recalled regulators have a brass DIN retainer manufactured prior to June 2006. The recalled Aqua Lung Titan Din 1st Stage regulators have serial numbers lower than 6062501 stamped on the side of the regulator's body. Recalled Titan/Conshelf DIN adaptors are marked "300 BAR MAX" on the side of the part. DIN adaptors marked "300 BAR MAXI" are not included in this recall.

Confirm these details on the official CPSC notice

Why it was recalled

Over-tightening of the DIN retainer by a technician during installation can result in the retainer breaking under pressure, a rapid escape of air from the scuba cylinder, and the regulator detaching from the scuba cylinder. This poses a drowning hazard to divers.

Incidents and injuries

The firm has received one report of a DIN retainer breaking under pressure. No injuries have been reported.

Official remedy

Consumers should immediately stop using the recalled diving regulators and DIN adaptors and return them to any authorized Aqua Lung dealer for a free replacement DIN retainer.

Product and sales details

Manufacturer
Aqua Lung USA, of Vista, Calif.
Recall number
08-393
Units
About 6,000
Manufactured in
France
Sold at / sales period
Authorized Aqua Lung dealers nationwide from January 1997 through September 2008 for about $300 to $450 for the scuba regulators or $70 for DIN adaptors sold separately.

Titan DIN 1st Stage Scuba Regulators and Titan/Conshelf DIN Scuba Adaptors

CPSC product type: Scuba Diving/Water Activity Equipment

Recall contact information

For additional information, contact Aqua Lung toll-free at (877) 253-3483 between 8 a.m. and 5 p.m. PT Monday through Friday, or visit the firm's Web site at www.aqualung.com

Verify phone numbers, hours, and websites on the current CPSC notice before contacting the firm.

Know someone who has one?

Recalls only work when owners hear about them. Send this notice to family or friends who might own the same product.

Related recalls

Other notices from the same brand or product category.