Recall 11-051, published November 23, 2010
Bosch hammer drills
Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.
Affected model numbers
HD19-2DBosch 1/2 inch 2-Speed Hammer Drill with model number HD19-2, HD19-2D, HD19-2L and 1/2 inch 2-Speed Hammer Drills with model number HD 21-2 are included in this recall.
Which products are included?
Bosch 1/2 inch 2-Speed Hammer Drill with model number HD19-2, HD19-2D, HD19-2L and 1/2 inch 2-Speed Hammer Drills with model number HD 21-2 are included in this recall. "BOSCH" is printed in red lettering on the side of the drills.
Confirm these details on the official CPSC noticeWhy it was recalled
The models have a grounding system and trigger switch that could cause ground wire abrasion and/or ground connector failure posing a shock hazard. In addition, the switch trigger could become stuck in the "on" position posing an injury hazard to the user.
Official remedy
Consumers should immediately stop using the hammer drill and return hammer drill to Robert Bosch Tool Corporation for repair.
- Brand
- Bosch hammer
- Recall published
- November 23, 2010
- Category
- Power Tools
- Units
- About 20,000 units
- Sold at / sales period
- Home improvement, hardware and major retailers nationwide and various distributors from September 2009 through August 2010 for between about $140 and $220.
