Model number check

30-09TL

Is 30-09TL recalled? Yes. Model number 30-09TL is listed in CPSC recall 78-074: JC Penney six-inch bench grinders, announced August 29, 1978. Hazard: electric shock.

Compare every letter, number, space, and suffix on your product label. A similar-looking model may not be included in a recall — the official CPSC notice is always the final authority.

Recall 78-074, published August 29, 1978

JC Penney six-inch bench grinders

What to check on the product label

Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.

Affected model numbers

30-09TL
Additional identifying details

The repair program applies to the following models of six-inch bench grinders purchased after June 1973 and not showing any three-digit date code embossed on the nameplate (e.g., 57C): Manning Bowman model 715100, Toastmaster model 5577, Power House model 711100, J.

Which products are included?

Read the full CPSC product description and restrictions

Bench Grinders Repaired by McGraw-Edison NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE August 29, 1978 Release # 78-074 Bench Grinders To Be Repaired WASHINGTON, D.C. (Aug. 29)-- The Portable Appliance and Tool Group, McGraw-Edison Co., Columbia, Mo., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary repair program for about 16,000 six-inch bench grinders, which may pose a shock hazard. A protective sleeve insulating a lead wire may wear through on some of the units, bringing the wire into direct contact with the motor shaft and possibly resulting in severe shock if the tool is not properly grounded and if the user is grounded or touching a grounded metal object such as a water pipe. Two cases have been reported where the insulation has worn through, one of which resulted in a shock. The tools were manufactured from April through July 1973, and for limited periods between February 1977 and January 1978. The repair program applies to the following models of six-inch bench grinders purchased after June 1973 and not showing any three-digit date code embossed on the nameplate (e.g., 57C): Manning Bowman model 715100, Toastmaster model 5577, Power House model 711100, J. C. Penney model 4030, Western Auto-Wizzard model POE 6203A, Ward's Power Kraft model TGB-5102A, and K-Mart model 30-09Tl. Also involved are K-Mart model 30-90Tl showing the date code 77B, 77D, 77E or 77F, and Ward's Power Kraft model TGB 5102A with the 77F date code embossed on the nameplate. Tools having these date codes and containing an orange inspection sticker on the carton or the unit have already been inspected and are not involved in the repair program. Anyone owning one of these bench grinders should temporarily stop use and write to: Bench Grinder Repair Program, c/o National Service Manager, Portable Appliance and Tool Group, McGraw-Edison Co., 2nd and Vine St., Boonville, Mo. 65233, to get instructions for having the unit checked and repaired free-of-charge. To verify brand names and model numbers, consumers may contact CPSC's toll-free Hotline at 800/638-2772.

Confirm these details on the official CPSC notice

Why it was recalled

Electrocution/Electric Shock

Official remedy

No separate remedy text is present in the API record. Follow the official CPSC notice.

Recall published
August 29, 1978
Category
Power Tools

Other model numbers in this recall

Related recalls

Selected by shared brand or consumer-product category.