Recall 14-063, published December 18, 2013
Fox Factory Evolution 2013 Mountain Bike Suspension Forks
Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.
Affected model numbers
120MMThe Evolution name and logo are on a sticker on the front fork with the FOX brand name logo.
Which products are included?
The recalled suspension forks are model year 2013, 32 and 34 Evolution Series with 120mm to 160mm of travel. The Evolution name and logo are on a sticker on the front fork with the FOX brand name logo. Recalled forks can be identified by the serial number, which is found on the underside of the crown after removing the front wheel. The forks were sold as original equipment on some of the following 2013 model year mountain bikes: BMC, Cannondale, Commencal, Diamondback, GT, Kona, Lapierre, Norco, Orbea, Raleigh, Rocky Mountain, Santa Cruz, Scott, Specialized and Trek. A small quantity of suspension forks were sold to retailers or distributors as aftermarket accessories.
Confirm these details on the official CPSC noticeWhy it was recalled
The suspension fork's damper cylinder/piston can separate and cause the front wheel to detach, posing a fall hazard.
Official remedy
Consumers should stop using the bicycles with recalled Fox Factory suspension forks and bring them to the place of purchase for a free repair. Consumers can check their serial number at www.ridefox.com/, see the link at the lower left of the page, or contact Fox for assistance with discerning whether their bicycle has the recalled product and for instructions on how to return the recalled product and receive the free repair if they cannot bring their bicycle or fork to the place of purchase.
- Brand
- Fox Factory
- Recall published
- December 18, 2013
- Category
- Sports & Outdoors
- Units
- About 11,250 in the U.S. and 1,250 in Canada
- Sold at / sales period
- Bicycle retailers nationwide between August 2012 and October 2013 as original equipment on bicycles priced from about $2,000 to $4,400. Products sold for aftermarket use for about $600 to $650.
