
Custom Buoyancy Inc. Overpressure Valve
Custom Buoyancy Inc. (CBI)
The overpressure valve can stick in the open position, posing a drowning hazard to divers.
- Drowning
- 7,700 units
- 3 reports
CPSC recalls involving bicycles, e-bikes, helmets, exercise equipment, camping gear, water sports, and off-road recreational vehicles.

Custom Buoyancy Inc. (CBI)
The overpressure valve can stick in the open position, posing a drowning hazard to divers.

Eddie Bauer Outlet Stores
The insulated bottles have a weak seal and can leak hot liquids, which poses a serious burn hazard to consumers.

Kent International
The front fork assembly on these mini-bicycles can loosen or break, and cause the rider to lose control and crash.

Suzuki Motor Corporation has determined that the Eiger automatic ATVs were produced with an internal manufacturing flaw. This flaw could cause the crankshaft to break during operation. A broken crankshaft will interrupt power transfer from the engine to the transmission and the drive wheels, leaving the driver stranded away from his or her base of operation.

Kawasaki Motors Corp., U.S.A. (KMC)
The rear wheel hubs, in the case of the KLF220 and KLF300-B, and the front and rear wheel hubs of the KLF300-C, are held to their respective axles by a castellated nut, that is secured to the axle with a specified torque, then locked in place by a cotter pin. On a limited number of the affected models, the axle nut was not tightened to the proper torque before the cotter pin was inserted. The cotter pin or axle nut failure could cause the hub to come off of the axle shaft, creating the potential for an incident, resulting in injury or death to the rider.

Diving Unlimited International (DUI)
The overpressure valve can stick in the open position, posing a drowning hazard to divers.

The buckles on the climbing sticks and tree steps can fail, posing a risk of serious injury to hunters.

Kawasaki Motors Corp., U.S.A. (KMC)
The rear axle on some of these units could have been incorrectly heat-treated. This could allow the rear axle to break, causing a loss of vehicle control and injury.

The spa heaters have an internal electrical connection that can overheat and ignite the heater and spa, posing a fire hazard.

There may be an inadequate weld on the front upper A-arm bracket. If the upper A-arm bracket separates from the frame, the rider could lose control of the vehicle and be seriously injured.

Some wheels have not been properly welded. The wheel could collapse while riding, possibly resulting in serious injury.

The brackets that attach the aero bars' forearm pads, where riders rest their arms, can loosen or separate during use, causing the rider to lose control and crash.