
Next Voltage and "Vertical Street Blade" BMX bicycles
Dynacraft Industries
The stems on these bicycles can loosen during use, causing riders to lose control and fall.
- Fall
- About 52,900 units
- 35 reports
CPSC recalls involving bicycles, e-bikes, helmets, exercise equipment, camping gear, water sports, and off-road recreational vehicles.

Dynacraft Industries
The stems on these bicycles can loosen during use, causing riders to lose control and fall.

Polaris Industries
The ATVs may have loose or leaking oil cooler line clamps, that can release hot pressurized oil. This may lead to thermal burns, to engine failure due to oil pressure loss and, in rare circumstances, could cause a vehicle fire.

Front rail of crampon could be improperly heat-treated and toe points could bend, resulting in malfunction of the crampon.

These helmets fail impact testing required under CPSC's Safety Standard for Bicycle Helmets, violating the Consumer Product Safety Act. Riders wearing these helmets are not adequately protected from falls, and could suffer head injuries.

Kawasaki Motors Corp., U.S.A. (KMC)
There is the potential for failure of a weld securing the tie-rod plate to the steering column. If the weld fails, the plate can become detached from the steering column, resulting in a loss of steering control.

The ATV contains a remote shutoff switch that shuts the ATV off. For the remote shutoff switch to work, the receiver switch on the ATV must be in the on position. It was possible for the ATV to be started with the receiver switch in the off position. The ATV could not be shutoff with the remote switch, should the rider start to act in an unsafe manner. This could cause serious bodily harm.

Trak Inc., doing business as Karhu
Screws and other hardware used to keep the bindings intact are too short, causing the binding to separate from the shoe. This poses a fall hazard to consumers.

Software in the dive computers may inaccurately calculate desaturation times, resulting in possible decompression sickness under aggressive dive conditions.

Polaris Industries
The mounting bolts on the front brake calipers were not tightened to the specified torque value. This may cause the bolts to loosen or fall out during operation, resulting in brake failure. This could result in severe injury or death.

The frames on these bicycles can break, which can cause riders to lose control and crash.

Century Tool and Manufacturing
The burner assembly in the stoves can restrict the flow of gas, which can cause a leak. The leaking gas can ignite and weaken the hose, causing it to separate from the stove and pose a fire hazard to consumers.

The tip of the wire that forms the frame for the connecting tunnel can become exposed, resulting in possible lacerations.