Model number check

UNIMODE9600UDLS

This model number appears in one official CPSC recall notice for household products. Latest recall published October 5, 2010.

Compare every letter, number, space, and suffix on your product label. A similar-looking model may not be included in a recall — the official CPSC notice is always the final authority.

Recall #11-702 · Published October 5, 2010

Fire Alarm Control Panel

What to check on the product label

Compare the model on your label, then check any serial numbers, date codes, and exclusions in the notice. A model match alone does not confirm that your unit is included.

Affected model numbers

UNIMODE9600UDLS
Additional identifying details

The words "Fire-Lite Alarms by Honeywell" and the model number are located on the front of the fire alarm control panel.

Which products are included?

This recall involves the Fire-Lite model MS-9600LS Series control panel that uses the SLC-2LS Expander Module. The following control panel model numbers included in this recall are: MS-9600LS, MS-9600LSC, MS-9600LSE, MS-9600UDLS, MS-9600UDLSE, UNIMODE9600LS and UNIMODE9600UDLS. The control panel is the main portion of the fire alarm system. The software in the expander module tells the system to sound an alarm and flash warning lights. The words "Fire-Lite Alarms by Honeywell" and the model number are located on the front of the fire alarm control panel.

Confirm these details on the official CPSC notice

Why it was recalled

The recalled fire alarm control panels used with an SLC-2LS expander module can fail to sound an alarm in the event of a fire.

Official remedy

Building managers should contact Fire-Lite Alarms for a free software upgrade. Fire-Lite Alarms is contacting its customers directly.

Remedy type: New Instructions

Brand
Fire-Lite Alarms
Recall published
October 5, 2010
Units
About 530
Sold at / sales period
Authorized wholesalers and distributors nationwide from October 2008 through March 2010 for between about $875 for the expander module and $2,285 for the control panel. These distributors resold and/or installed the control panels and modules for use in commercial facilities such as office buildings.

Related recalls

Selected by shared brand or household-product category.

No. 12-701Smoke & CO Alarms

ADT Recalls Carbon Monoxide Detectors Due to Failure to Properly Indicate End of Useful Life

Sensor System

Hazard: When the CO detectors reach the end of their useful life, they should send a signal to make a sound in the home alarm panel alerting consumers it is time to replace them and a signal to ADT's alarm monitoring center. Some of the detectors were not wired properly to the ADT alarm system, resulting in the sound not going off in the home alarm panel and no signal to the ADT alarm monitoring center at the end of its useful life. Not replacing a CO detector at the end its useful life poses a CO poisoning hazard to consumers.

Models